Bell 47 Maintenance Manual

Bell 47 Maintenance Manual 5,8/10 6083 votes

The Bell 47 is a single-engine two-seat light utility helicopter produced by the US-American manufacturer Bell Aircraft Corporation, later Bell Helicopter Company, today Bell Helicopter Textron. The designation for Bell 47 is US Army duties was H-13 Sioux. Bell 47 flight schools & instruction. Flight schools page 2; flight schools page 3; bell 47 flight schools page 4; bell 47 maintenance & parts. Bell 47 maintenance & parts page 2; bell 47 maintenance & parts page 3; bell 47 maintenance & parts page 4; bell 47 sales, appraisals, & consultation; bell 47 aerial applicators; bell 47 external load. The Bell 47™ is a two-bladed, single engine, light helicopter manufactured by Bell Helicopter. The Bell 47 became the first helicopter certified for civilian use on March 8 1946. The bell G 2 uses the 47GLycoming O-435 / 190HP as the H-13 is 195HP. The Bell 47 helicopter entered U.S. Military service in late 1946 and was. Bell Helicopter 47 G-5A Maintenance & Overhaul Manual Bell Helicopter 47 G-5 47 G-5A Maintenance and Overhaul Manual Disclaimer: This item is sold for historical and reference Only. These are either ORIGINAL or COPIES of manuals and blueprints used when these aircraft were in active duty, now transferred into electronic format.

AirframeScotts-Bell 47 Inc 47G-2A, 47G-2A-1 NULLCOVID-19 COVID-19 Notices EngineTextron Lycoming VO-435-A1E, VO-435-A1F Javascript is disabled on your browser. To view this site, you must enable JavaScript or upgrade to a JavaScript-capable browser.

Display Status:

This object is not on display at the National Air and Space Museum. It is either on loan or in storage.

Collection Item Summary:

This collection consists of several manuals: Bell Helicopter Illustrated Parts Breakdown, Model 47 Series Helicopter, 30 September 1953; Bell Maintenance and Overhaul Instructions, Introduction, 30 July 1953; Bell Model 47 Service Instruction Index, 1 July 1984; Pump End Assembly and Pump / Motor Assembly drawings; and Bell Service Instructions for Model 47, dated 1948 to 1989. Also included are two oversized black and white images of the National Air and Space Museum specimen Bell 47B.

Topic

Data Source

Restrictions & Rights

Physical description

Audit

Date

Notes

In 1946, the Bell Model 47 became the first civil helicopter in the world to gain commercial certification. Its marked stability led to its wide acceptance for a myriad of uses, including mail service and passenger transport.

Cite as

Bell Helicopter Model 47 Manuals and Photographs, Accession number 2005-0025, National Air and Space Museum, Smithsonian Institution

Repository Loc.

Bell 47 Maintenance Manual
National Air and Space Museum, Archives Division, MRC 322, Washington, DC, 20560

Type

  • Technical manuals
  • Collection descriptions
  • Photographs

Local number

Background

Bell's model 47 was a development of the Model 30. Five Model 30 aircraft were built in 1943 , and the third of these provided the basis of the Model 47. Eleven prototype and evaluation aircraft were built. The first prototype to fly was on December 8 1945. The aircraft featured an open side by side cockpit, quadricycle undercarriage, and a 175hp Franklin O335-1 engine. Type certification was achieved on March 8, 1946 - the first civil helicopter certification. Stereotyped today as the 'MASH' helicopter, the aircraft proved popular in civil and military use.

The USAAF were the first air force to acquire the helicopter. Twenty-eight 175hp Franklin O-335-1 powered model 47A aircraft were received in 1947, with fifteen evaluated as the YR-13, three as winterised YR-13a, and 10 passed to the USN for evaluation as the HTL-1. Both services ordered further aircraft. The 175hp Franklin 6ALV-335 powered model 47B led to the initial US Army military version (65 aircraft ordered in 1948). This was powered by the 200hp Franklin O335-3 and designated the H-13B and named the Sioux. Parallel civil development lead to the model 47B-3 aimed at the agricultural and utility role. Military development started with the H-13C conversion of 15 aircraft which included the removal of the tail covering, a change to skid undercarriage, and provision to carry external stretchers in panniers. The civil model 47D was similar, but introduced the plexiglass 'goldfish bowl' style canopy in place of the previous 'car' type windscreen. The 1949 model 47D-1 was a three seater powered by the 200hp Franklin O335-5 and had an openwork tailboom like the H-13C. The H-13D (87 ordered) had two seats with single controls and featured the uprated O-335-5 engine. The H-13E was a dual control 3-seater, featuring a new main transmission and 490 were ordered.

The definitive civil version was the model 47G and was produced in 10 variants, primarily distinguished by engine installation. The three seater was initially powered by the 200hp Franklin 6V4-200-C32AB, added extra fuel capacity, and introduced new stability features including a small elevator on the tail. The military designation was the H-13G and 260 were delivered. The model 47G-2 was uprated with the 200hp Lycoming VO-435 engine, while the model 47G-2A (similar to the H-13H) had a 250hp Lycoming VO-435. Other models (like the 47G-2A-1) incorporated increased fuel and improvements to the rotor blades. The model 47G-3A was a 225hp supercharged Franklin 6VS-335A powered version, while the 47G-3B had a turbocharged 260hp Lycoming VO-435-25. The 47G-3B also featured a tail extension of 0.36 m (1'2ft) and had the rotor diameter increased by 0.61m (2ft). 265 were delivered as the OH-13S. Similar to the 47G-3B-1 with its increased cabin width, and featuring extra avionics, the TH-13T was a two seat instrument trainer. Two H-13H were converted to H-13K by installing the Franklin 6VS-335 engine and increasing the rotor diameter. The H-13H was also used by the USAF, as was the 3 seat 240hp Lycoming VO-435 powered H-13 J used as a Presidential transport. The model 47J Ranger was produced as a 4 seat civil version of the H-13J which ran to 6 variants.

Post 1962 the various military designations were changed in line with the new tri-service nomenclature. Most were designated as OH-13 or TH-13 of various marks, with the USAF, USN and Coast Guard having a number of versions in service. A number of non-US military operators have utilised the Bell 47. Some military operators purchased civil models. Augusta, Kawasaki , and Westland produced the aircraft under license (1,200, 239, and 216 repectively). Bell ceased production after more than 4000 units in 1973, and Augusta produced the last model 47 in 1976. Third party conversions have primarily been agricultural, or engine related (such as the Soloy turboshaft conversion).

The first model 47 to visit New Zealand came with a US Coast Guard Icebreaker in December 1955. The first model 47 on the New Zealand civil register was ZK-HAC, a model 47G imported by James Aviation. This began work in the upper South Island in May 1956. It was later used for hydro-electric survey work. The aircraft was damaged in a landing accident in a remote area along the Motu river on May 7, 1957. Although some instruments had been salvaged, the remainder of the airframe was swept away in a flash flood on May 19th. ZK-HAC was the second helicopter on the register, following ZK-HAB, a Hiller UH-12B which had first flown at Hamilton on January 11, 1955 and also belonged to James Aviation. (Helicopter registrations until fairly recently have started ZK-H). For the first ten years of helicopter operations, registrations were fairly evenly split between these two types. ZK-HAA was also a Model 47. The registration had been reserved for Helicopters (NZ) Ltd in 1955, but the model 47D-1 it was applied to did not commence work until September 1956. In the years that followed, about 60 model 47 variants have been registered in New Zealand. The aircraft has filled many roles - passenger, freight, medivac, ag-spraying, pilot and customs onboard delivery, deer culling and recovery, fish spotting, and more. In recent years the active numbers of this venerable helicopter have steadily shrunk. The last model 47 on the active register was withdrawn on March 24, 1999 having been exported to Australia (where it became VH-AHL). This was ZK-HSO (c/n 7632), a model 47G-4A operated by B A & J C Emeny Ltd. It was preceded by two model 47G-5A's; ZK-HAK (c/n 25160) which was withdrawn in February, 1998, and ZK-HUN (c/n 25052) which was also exported to Australia in November. It's hard to say thats the end of the road however, as a variety of airframes are still to be found in hangars around the country.

The RNZAF ordered its first helicopters in April 1965. The order was for 6 Bell 47G-3B1, 5 UH-1D Iroquois, and 2 Westland Wasp HAS.1 aircraft. The Model 47 aircraft arrived on December 17, 1965 and were subsequently the first helicopters to go into New Zealand military service. The aircraft were allocated to 3 (Battlefield Support) Squadron, a tri-service unit based at Hobsonville. The RNZAF have been responisible for Army and Naval pilot training, and the maintenance of their aircraft. A further order was placed in June 1968 for another 7 Model 47G-3B2 aircraft (along with more Iroquois and some A-4K Skyhawks) which arrived in 1970. These were also assigned to 3 Squadron (which had lost the 'Battlefield Support' designation in 1969), although three helicopters were assigned to the Pilot Training Squadron at Wigram later that year. Although the aircraft were built as civil versions, they correspond to the OH-13S and have been known as Sioux throughout their service. The role of the Sioux has been reconnaisance, battlefield liason, utility work, and as a basic trainer. As well as New Zealand operations (Primarily from Hobsonville and Waiouru), the aircraft have operated in Australia, Fiji, and Malaysia. As a result of the training role, and low level flying in support of the other roles, the Sioux have had the highest attrition rate of any post-war RNZAF aircraft. This is despite a number of rebuilds.

Download Glypha LT Std 45 Light, font family Glypha LT Std by with 45 Light weight and style, download file name is GlyphaLTStd-Light.otf. Glypha font free mac Download Glypha LT font for PC/Mac for free, take a test-drive and see the entire character set. Moreover, you can embed it to your website with @font-face support.

The machines lost in service were:

  • NZ3701 (c/n 6514) 47G-3B-1 crashed on January 19, 1979 following a turbo-charger failure near Waiouru
  • NZ3703 (c/n 6516) 47G-3B-1 crashed June 30, 1977 after a tail rotor failure in the upper Awatere valley.
  • NZ3704 (c/n 6517) 47G-3B-1 crashed January 16, 1987 on sand dunes south of the Kaipara Heads during a low-flying exercise.
  • NZ3707 (c/n 6810) 47G-3B-2 crashed April 2, 1974 when it hit the ground at Waiouru. The airframe was written off and parts used in the contruction of Instr221.
  • NZ3708 (c/n 6811) 47G-3B-2 broken up for spares after a hard landing on June 25, 1981. This resulted from fuel exhaustion during a flight 86km (54 miles) from Nausori, Fiji during Exercise Tropic 81.
  • NZ3709 (c/n 6812) 47G-3B-2 crashed November 11, 1983 during a reconnaissance flight south of Waiouru.
  • NZ3710 (c/n 6813) 47G-3B-2 crashed July 16, 1985 while carrying out a 'torque turn' at Waiouru.
  • NZ3711 (c/n 6814) 47G-3B-2 crashed November 15, 1971 when an army pilot flew into a hangar at Waiouru. The aircraft was destroyed in the subsequent fire, although parts were used in the contruction of Instr221.

All surviving airframes had been converted to Model 47G-3B2 standard by 1979. In 1988, as a result of reduced airframe numbers, the aircraft was restricted to the basic training role. Training of Army pilots was discontinued. (Interestingly, the first two Army pilots had been trained in late 1963 by John Reid of Helicopters (NZ) Ltd in model 47G-2 ZK-HAQ. Captain R.Pearce and Lieutenant W.Steward were then posted to a British helicopter unit in Malaya for two years). Pilot training was moved from Wigram back to Hobsonville in 1994 (due to the impending closure of the base). Although a replacement has been considered, this has been deferred a number of times. Five aircraft remain in service as of May 1, 2000 (with three operational and two in reserve). The listing below shows the current RNZAF aircraft.

The remaining machines are:

Bell Maintenance Manual

  • NZ3702 (c/n 6515) 47G-3B-1 airworthy. (illustrated below)
  • NZ3705 (c/n 6518) 47G-3B-1 airworthy. (illustrated below)
  • NZ3706 (c/n 6519) 47G-3B-1 airworthy. (illustrated below)
  • NZ3712 (c/n 6815) 47G-3B-2 airworthy.
  • NZ3713 (c/n 6816) 47G-3B-2 airworthy.
  • INSTR221 (c/n ----) 47G-3B-2 is a composite airframe built from parts recovered from NZ3707, NZ3711, and other civil components. The 'bubble' appears to be from NZ3704. The rebuild was carried out in 1974-75, but the serial was not issued until 1985. The aircraft is not airworthy, and is located at RNZAF Base Woodbourne as an instructional airframe in the Ground Training Wing. (Illustrated below)

Last Text Update:- 20 May, 2000
Last Picture Update:- 14 May, 2003

Technical Data

Data is for the Model 47G-3B-2

  • Accommodation : 3
  • Dimensions
    • Rotor Span : 11.32m (37'2ft)
    • Length : 9.9m (32'6ft)
    • Height : 2.82m (9'3ft)
  • Weight
    • empty : 858kg (1,888lb)
    • max : 1,338kg (2,950lb)
  • Power Plant : 280hpLycoming TVO-435
  • Performance :
    • max speed : 168km/h (105mph)
    • max climb : 1,190ft/min (6.05m/sec)
    • ceiling : 20,000ft (6,096m)
    • range : 396km (248miles)


Images


Bell 47 Maintenance Manual Transmissions

Close Up

Remember to let me know if you have a request for an image of a particular part of the aircraft!


Bell 47 Maintenance Manual Parts

© 2000-2003 Phillip Treweek, all rights reserved

Comments are closed.